Sunday, September 20, 2015

Forraging . .


Berries plenty . . .
We went to a presentation in Ottawa about Urban food foraging, but have never actually used those skills taught there until this trip. Although I must admit , a lot of foraging is being done in the delightful “Historical” pubs along the canal. While we of course are visiting because of the amazing historical significance of these structures, we have also managed to forage some meals from them. We have also managed to use some of the wildlife along the route to feed our faces.

Lots of Blackberries
Early on Bill discovered that blackberries were growing in amazing numbers along the canal. He disappeared at one stop for an hour, returning with a mug of berries which went on our cereal the next morning. He became a bit of a problem from then on, and we had to constantly remind him to “get on up and open the lock and leave those berries alone”. Finally we found ourselves in a lock with no boats waiting and a huge patch of berries glowing in the sunlight beside the lock, so we left the boat in the lock and picked a couple more mugs of delicious ripe blackberries.

Today Regis made excellent use of these berries and added some store-bought mixed berries as well as a ripe pear and mixed it up in a berry crumble.

Haggis on the hoof . . .
As she was baking this delicious desert we happened to be working our way up through a series of locks with three other boats. The smell of the crumble cooking was wafting out of the back hatch, and Bill commented that as much as he was enjoying the faint smell of the diesel engine pushing our craft along, he was finding the baking crumble a delicious alternative. As well the folk form the other boat working the locks with us were suggesting that they may forgo their planned trip to the pub to come get Regis’ desert. Although we assumed this was a friendly joke, they did ask “Where did you Canadians decide to moor?”.

Thursday, September 17, 2015

Middle Earth


Bill Towndrow - Guest Blogger
Stopping in Barlasten, which featured the Wedgewood Museum and showroom, the girls went off to the museum while Bill and I went to the pub to quench our thirst after a long day of boating. Soon after we sat down a couple with a beautiful “long-haired” greyhound came in and sat down with a couple of pints. Bill went up to the dog who was so friendly (The Pub had a clearly written rule welcoming “Well Behaved Dogs”), and this dog immediately nuzzled into him to be patted. I also went up and chatted with the people, but Bill was there for a while discussing dogs, boats and other canal items as he discovered these folks were also on a boat.

Following a delicious meal of burgers, Rabbit stew and gnocchi, we wandered back to the boat. Bill started telling Margaret about a “Really Nice” boat named “Gandolf”  back a ways that he wanted her to see, and while Regis and I went back to the boat, they went walking to see this boat.

It turned out that  “Gandolf” was owned by the Greyhound and his friendly family. Bill loves chatting with people about their boats and when he and Margaret explained how much they loved the boat they got invited inside for a tour. The rest of this Blog is being done by a “Guest Blogger” Bill Towndrow as he describes this beautiful craft.

Bills New Friend
Start with a bare hull, in this case a “traditional” design which means that starting from aft, there is a low headroom cabin fitted with a small coal fired cook stove surrounded by pine cabinetry making use of every cubic inch for function. The stove is important, not only can you cook and bake with it, it keeps the boatman as s/he steers, warm during inclement weather. This is a traditional boatman’s cabin and in days when these were workboats, whole families were raised in this space only a few feet long.

Forward of this is the engine room. The engine is much like ours, perhaps a little more powerful.

(Although we heard, and glimpsed, some beautiful vintage 2 cylinders put-putting away as they passed.) The difference, as the lady of the boat said was her favourite part, is that this engine is in it’s own compartment.  You pass by the engine as you pass forward to the main cabin. Above you is a small two sided skylight called a pigeon box, and two wide doors on the side to allow venting of engine heat when the radiated heat was not wanted.  Whether this heat was directed on board or vented to the outside, the heat first dried the laundry hanging around the space. If you spend a week or two in a small floating space, an area to dry towels and basic laundry items is much appreciated. Also, there would be no pleasure servicing our engine, located under the plates where the tiller is located. This engine is low down but fully accessible, just like an engine room on the largest sea-going ship. And like its larger sea-going sisters, it has a long propeller shaft and hence the reason for the rear cabin being less than 6’ high.
Where in England is this?

Also, decorating all these spaces, the lady of the boat painted traditional castles and roses, all beautifully executed.

But it gets better…  Moving forward from the engine compartment you enter a galley and saloon that is bright, spacious and airy.  Every piece of wood, real wood, not laminate panels, was crafted and fitted by the man of the boat with help from her ladyship. All painted in cream, with the area below the gunnels paneled in varnished pine, it felt like a cozy palace. I know that’s an oxymoron but it felt warm and inviting as well as spacious. Fitted with a new technology diesel cooktop and stove, a diesel space heater, a dining table for 4 that still allowed someone by, wooden floors and even a well-equipped spice rack.  Oh, and before I forget, two very comfy armchairs and ottoman. This is a space you can live in.


And the traditional paintings of castles, etc, definitely took on a Tolkien-like fantasy as the artist herself, this lady of the boat, expressed her artistic license. The dragon “Smaug” even graced the inside of the forward saloon doors. Outside, on the bow, was “Gandalf” in Middle Earth script, in case you missed his name painted on the side.

You can have your glamorous, “bespoke”, boat. Give me this hand crafted, personalized work of design and art. When you enter a space and immediately relax, it is a compliment to the craftsmen - this husband and wife team who bought the bare hull, spent 2 weeks camping on it bringing it home, then spent 3 years creating what is truly unique, truly individual.

And the “port” of registry – Splatt Bridge, (love the British place names) where they keep their house, Middle Earth. So the question is: is Splatt Bridge a portal to Middle Earth? Because while she convinced me Splatt Bridge is real in our world, she never claimed Middle Earth was.


Oh, Oh NO GO!!!


The Engineer at work
When you rent these narrowboats, they give you about 15 minutes of instruction, and this includes a brief explanation of that mysterious thing that purrs, growls putters and vibrates under your feet pushing the boat through the canals. For some renters I expect it must be strange to have to check the oil, pump grease onto the propeller shaft, and reach into the murky water in the prop access box, but for me this is all part of the fun; I enjoy working with anything mechanical, and the other day I actually had to do a repair of sorts.

We had just gone through a lock and I powered out of the lock with no problem and docked at the British Waterways water access point to fill our water tank. However when I went to leave, the boat would not go forward. The propeller was spinning in reverse, but when I put it into forward, the boat moved backwards . . . way weird . . .

Pulling up the access hatches (Makes it sound like a real BIG boat), to give me room to see
The Cause of the Problem . . .
all the bits that make the boat go. Everything looked in order and there were no exploded transmissions or fluid leaks, so the next thing was to open the prop hatch and see what was down there. Now even though it is only about a foot down through the water to see the propeller and it’s shaft, the water is VERY muddy! So, looking down is not usually on option; you have to roll up your sleeves and reach down and feel around.

I was expecting perhaps a tangle of weeds, but instead my hands contacted fabric, a tangle of something unexpected . . . feeling around with a fair bit of trepidation, I finally determined it to be an old mat. Probably like one of the annoying mats in our boat situated at each door that refused to lie flat and having to be readjusted constantly.

Underway again - leaving Bill behind
Tugging did nothing, and it refused to budge, so my handy French “Opinel” belt knife came out and I started slicing bits away blindly under the water. I was finally able to extract a large hunk of ugly matting, and the shaft was clear.

Secure the prop hatch, close down the engine hatches, fire up the diesel and engage forward. Water churned out the back of the boat and we were underway. McGiver succeeds again . . . .

Tuesday, September 15, 2015

Looking for Golem


Tunnel Entrance

Yesterday we had planned to go through the Harecastle Tunnel, but arrived a bit too late. There was no room to turn around, so I ended up having to play the role of “tow horse” and pull the boat backwards (It is almost impossible to actually drive the boat backwards) to a safe mooring spot for the night.

Today we actually went through the tunnel. It was quite an experience. Rather than go around the big hill in their way, or build a huge chain of locks, they decided to dig a tunnel right through the hill. This tunnel was started in 1770 and took 7 years to complete. The tunnel is almost 2700 meters long, and takes around 45 minutes to make your way through. It is just 9 feet wide at it’s widest, and about 12 feet high. It is lower in the middle, and going through in a narrowboat you have to duck your head  for a long time. There is no lighting, so you must turn on your boat headlamp, but there is not light on the back of the boat, so you are in complete darkness back by the tiller.
That is really all you can see for 40 minutes

Approaching the tunnel in the morning, we were met by the tunnel keepers, who gave us a complete course in “tunnel navigation” when they knew we had not done it before, but the boat following us flashed their headlamp, blew their horn and were allowed to proceed; obviously experienced boaters. We were told to maintain a certain speed or you tend to bounce off the side walls, and were told how to call for help by sounding our horn repeatedly until we got a reply. Then we were sent off.

Finally the light at the end.
It is quite an experience. The tunnel is a brick lined arch with water in the bottom. The bricks drip water all the way through, and in places water pours in from the side. It takes about 40 minutes to go through, and after a few moments at the beginning and a few moments at the end, you are in complete pitch darkness. Your headlight pierces the darkness for a bit, but only really shows you the sides and illuminates the dripping slimy bricks for a few yards ahead of you. There are rumors of a  ghostly Boggart living in the tunnel, but Margaret said she expected to see Golem from The Hobbit.
Tunnel Exit

In it’s heyday when the canal was an important means of transportation, the boats did not have engines, and there was no tow path, so the horses were led over the hill to wait for the boat, and the boaters had to “Leg” it through by lying on the top of their boat and walking through. This took them over three hours. I am not claustrophobic, but after 40 minutes, I was glad to see the light at the end of the tunnel. 


Of course you can find anything on the internet and if you are interested, this is a time-laps movie of a narrowboatgoing through the tunnel.

 

Canal Camaraderie


Working the Locks

Although some of the books on Narrowboats and the English canals, do not speak rather fondly of “Hire-boat” people (That’s us, BTW), but we have had nothing but pleasant experiences with the people we have met so far.

You meet people when you are working the locks, and generally everyone co-operates and you help each other when more than one boat is going through. There is a certain polite protocol with how you use the locks and if you follow this you get along fine. To conserve water you always let a boat that can drive right in use the lock first even if you arrive there first. On the last trip, the locks were big enough for two boats to fit in side by side (As in the picture I included in the post on the locks), but on this section of canals, the locks are only big enough for one boat at a time. Consequently if you meet another boat coming up when you are going down or if you are in a queue for a lock going in the same direction, your lock workers hang around and help the other boat. If there is only one or two people on the boat they appreciate the help working the locks. Standing around waiting for the clocks to fill or empty is a good opportunity to find out what is down the line. Other boaters are more than happy to suggest pubs or good mooring spots.
Waiting for the Lock

Today we followed another boat down through the locks for a while, and we had a good chance to chat with them about the trip. One day when Bill was working the locks, a man with two children showed an interest in how everything worked and Bill suddenly had two eager pupils who even followed him up to the next lock to “Help” work the gates.

Quite the Audience.
Today I did my first “down” lock, and unbeknown to me, I ended up with a very rapt audience of keen observers. There was a group of about 15 hikers who had arrived at the lock and were very interested in how it worked. Regis, Bill and Margaret were working the lock and I was piloting the boat. Everyone was listening to explanation about how things worked and of course they all turned to watch me bring the boat into the lock. Fortunately I did this one very well, and eased it in smoothly (If not as fast as Bill can do) so I expect I looked okay. This was the first time our Canada flag was commented on, so the group knew we from “Across the Pond”.

Even the wandering bands of teenagers hanging around under the bridge by the tunnel were quite friendly. 



Monday, September 14, 2015

A Day the Narrowboat Way

-->
Our Home for Two Weeks
Although in many ways living on a narrowboat for two weeks is similar to spending time in an RV, there are also many differences. To give you some idea of what it is like I will describe what a day could be like.

If we have a lot of locks to work our way through, we will usually sit and have breakfast together. The boat has an apartment sized fridge working on LPG, so we have cold milk for cereal, butter margarine and jam for toast, or eggs and delicious English bacon. As well, a nice cup of coffee is needed to start our day even on the boat. If we do not have locks to navigate, Bill likes to get underway right away, so he or I go check the engine, start it up and we push off. Whoever is piloting the boat, expects his or her breakfast (or at least a hot cup of coffee) is delivered out to the back of the ship where the tiller is. The other option is to get the boat under way and then eat in shifts so the pilot can take a break to have breakfast.

If we do not have locks to go through, the person piloting the boat is the only one who
Ok, I think the pub is just up here . .
actually has to do much, and they have to be constantly alert; a momentary laps to watch the cows in the field next to the canal can result in running ashore. The canal is often barely two boat widths wide, and in places two boats cannot pass without running into weeds, so it does not take much to be into the banks. It is not usually a problem however and the boats all have a long pole to push you back off the bank. You can zip along at the dizzying speed of 4 MPH at times but when you are passing other boats, even moored ones, or houses, you are expected to slow down to 2 MPH, so people walking on the paths beside the locks often pass you. Although the pilot stands and steers the boat with the tiller, and occasionally adjusts the speed, they have to be constantly alert, and it is actually quite tiring if you have to do it for a long time. Normally we take turns so no one has to be at the tiller all day. The people not piloting the boat can sit and watch the countryside slide by, or they can read, play games or even write
Watch out for Wildlife
blog posts on the computer . . .

A day with locks is completely different. Every time you need to go through a lock, someone has to get out of the boat to operate the locks. They take a special crank or windless to open and close the paddles which allow the water into the locks or drain it out. One person can operate the locks, but it is easier with two because you need someone on each side of the canal. If it is just one lock the person piloting the boat lets the lock workers off before the lock and picks them up after the lock. However if there are a series of locks in a row as often happens, the lock workers may as well stay out and walk to the next lock. On the days when we had to do 18 locks, you spent most of the day off the boat working the locks or walking to the next lock. If the locks are close together it is useful to have more than one person, because one person can go ahead to prepare the next lock. You spend a lot of time standing around waiting for the lock to fill or empty so you can open the gates to let the boat in.
 
Keep to the Canal
Sometime during the day we just decide to take a break and pull over and make a cup of tea. Bill has discovered that the blackberries are ripe along the canal and there are buckets of them. Sometimes when we stopped he would disappear to go pick blackberries and we had no idea where he was.

Usually around 3:00 we will find someplace to pull over to moor for the evening. Although there are designated “mooring” areas in towns, you can normally stop almost anywhere along the canal. There is a walking path beside the canal; these paths are called “tow-paths”, because before engines powered the boats horses towed the boats along the paths. These paths are right beside the boat, and all evening people out walking, biking or exercising their dogs go by usually with a cheerful greeting. They are used to finding someone new parked beside the canals close to where they walk. If you are in a town, you might find an interesting pub to try for dinner but in the countryside someone has to prepare an evening meal.
Tying up the Boat

Then, especially on days when we had a lot of locks, everyone goes to bed early, to be rocked to sleep by the gentle motion of the water. You sleep pretty well after a busy day on the canals.

Becoming a Lock-Smith

-->
Working the Locks

Today I learned how to actually pilot the boat in and out off the locks. I have watched how it is done, but knowing that it can cause a serious problem if it is not done right, I was hesitant to do it myself. Today I asked the captain of the boat (That would be Bill), to give me instructions on how it was done. His instructions were excellent, but he guided me through one lock and then politely announced that he was going to go and work the locks leaving me to run the boat all afternoon. Obviously this was a good plan, and by the end of the day I was sliding the boat into the locks with barely a bump. These locks are very narrow, with room for only one boat and there are barely inches on either side, and only a few feet aft and astern. As well, it seems that they like to put the locks on a slight angle so you cannot go straight in, but need to turn in at the exact time. Of course, turning a 60 foot long boat on a dime is not easy. However, you do feel good when you finally slip the boat around a bend and into the lock without touching the sides.The rest of this entry I wrote at home giving you a brief explanation of the locks.
  
Cruising the Panama Canal
When you transit through the Panama Canal, the lock system is a big deal, and the real highlight of a cruise with hundreds of passengers trying to get the best spot to watch the ships guided through the locks. On our river cruise through Europe the locks were not even mentioned in the literature and we tended to slip through overnight as if they were an unwanted hindrance to our trip. On this trip, we have almost 100 locks to navigate on the 100 mile trip; only these locks we have to operate on our own. In their heyday during the industrial revolution when these canals were THE method of transportation, each lock had it’s own Lock-keeper who lived in a cottage beside the canal and worked the locks and maintained the canals and the locks. Now the locks sit lonely and deserted and the users need to know how to operate them if they want to use the canal system.

Fortunately it is not difficult, and we quickly caught on after the first one. Most of the locks operate in both directions, so if the canals are busy you need to be aware of boats moving in both directions and if the locks are wide enough and traffic is heavy you are encouraged to share the locks and conserve water. If you are lucky, the lock is ready for you as you approach, the doors are open, the water at the right level and you can pilot the boat right in. Someone has to get off the boat to operate the gates and doors, so you need to get close enough to the shore to allow someone to jump ashore. If you are going up you need an empty lock, if going down you need to start with a full lock.

Don't do this!
Once in the lock chamber, it is very important to hold the boat in the center of the lock. If too close to the doors at either end you can become swamped by the incoming water or hung up on the frame as the water goes down; neither is good! Once the boat is in the center of the chamber, the operator outside makes sure all doors are closed tightly. Then the gates in the doors are opened allowing water to either enter the lock or flow out. The gates are small doors in the larger swinging lock doors. The gates are operated by remote ratcheting gears, which the operator works with a lock “windlass”. As the small door opens water rushes into the lock if going up, or out if going down. The pilot of the boat has to carefully keep the boat steady against the in/out flow of the water with the engine or with ropes.
Typical British Locks

You quickly learn that the water on both sides of the doors must be equal before the big doors will open; the procedure cannot be hurried, water pressure will not allow the doors to move. The operator works the doors by leaning back into the large counter-balanced leaver attached to the doors, and pushing back along the track beside the lock, worn by hundreds of feet over a hundred years. Once both doors are opened the boat can motor out, the operator can jump back onboard and you can continue on.

If lucky you can then settle back and enjoy the rest of the trip, but on two days of our trip we have to repeat this procedure 18 times . . . . .